Balance & Alignment
To avoid vibration or shaking of the vehicle when a tire rotates, the tire must be properly balanced. This balance is achieved by positioning weights on the wheel to counterbalance heavy spots on the wheel-and-tire assembly.
A wheel alignment adjusts the angles of the wheels so that they are positioned correctly relative to the vehicle's frame. This adjustment maximizes the life of your tires and prevents your car from veering to the right or left when driving on a straight, level road.
Let our qualified technicians here at Cutting Edge Automotive perform your balance & alignment maintenance.
A plug by itself is not an acceptable repair. The proper repair of a punctured tire requires a plug for the hole and a patch for the area inside the tire that surrounds the puncture hole. The repair material used - for example, a "combination patch and plug" repair - must seal the inner liner and fill the injury to be considered a permanent repair.
Punctures through the tread can be repaired if they are not too large, but punctures to the sidewall should not be repaired.
Tires must be removed from the rim to be properly inspected before being plugged and patched.
Let our qualified technicians hare at Cutting Edge Automotive inspect and repair your punctured tires.
Rotating tires from front to back and from side to side can reduce irregular wear (for vehicles that have tires that are all the same size). Visit Cutting Edge Automotive for information on how frequently the tires on your vehicle should be rotated and the best pattern for rotation.
To maintain tire safety, purchase new tires that are the same size as the vehicle's original tires or another size recommended by the manufacturer. Look at the tire information placard, the owner's manual, or the sidewall of the tire you are replacing to find this information. If you have any doubt about the correct size to choose, consult the professional technicians at Cutting Edge Automotive.
The tire tread provides the gripping action and traction that prevent your vehicle from slipping or sliding, especially when the road is wet or icy. In general, tires are not safe and should be replaced when the tread is worn down to 1/16 of an inch. Tires have built-in tread wear indicators that let you know when it is time to replace your tires.
These indicators are raised sections spaced intermittently in the bottom of the tread grooves. When they appear "even" with the outside of the tread, it is time to replace your tires.
Another method for checking tread depth is to place a penny in the tread with Lincoln's head upside down and facing you. If you can see the top of Lincoln's head, you are ready for new tires.
To learn more about the services we offer please contact Cutting Edge Automotive at 505-983-7636 Or visit our shop located at 837 Camino De Monte Rey Santa Fe, NM 87505.
Great service! They don't have much bling, but this shop is extra friendly. The work done is really top quality. Fair price, too. Waylon is excited to work on Porsches, and he has the skills to boot.
This guys are the best. I've been to other shops and dealers around Santa Fe and ended up being disappointed. But not by Chad and Waylan. I started taking my BMW and Porsche to them shortly after they opened their doors, and you can trust this shop. They're not going to have you do work you don't need, and look out for signs of potential future problems, that will save you tons of money down the road. Their hourly rates are reasonable (certainly for being experts on European cars) and their work is top notch, and they always get it right the first time. And they don't pad the cost of parts. You can't ask for more than that.
Conrad, Kim and the guys at Cutting Edge are always so helpful.
I had a big job done here--engine swap on my BMW 325i (E30) and Alden did a great job. Stayed within budget, did a bunch of extra stuff not billed for, and was extremely good at communicating via email and in person as to exactly what was going on and why. I didn't always understand everything he said, but he certainly made the effort to articulate everything. Not many competent mechanics are that articulate. The staff (Kim) is always upbeat and friendly and this is a very well-run shop.
Was referred to Cutting Edge for my 2006 Audi A6 repairs and maintenance and after taking my A6 here for the first time because of a check engine light (vacuum leak) these guys have earned my confidence and future business. The shop owner was very helpful in getting my car's problem diagnosed quickly and explaining the cost for the repair. The owner really went above and beyond when he put in a temp fix on the problem until I order the replacement part - all at no cost, just as a courtesy.
I was going through a tough time... and to top it off, my Volvo was having transmission issues. Another repair place recommended Chad at Cutting Edge. They explained everything well, and told me what needed repaired now vs what could wait. They not only put in a new transmission, but took the time to test it out. It's been a month, and their repairs resulted in a noticeable difference in my car. Excellent customer service, and excellent repair work. They are pros.
I broke down in my motorhome on Memorial day weekend with my son and 4 dogs. The mechanic that replaced my fuel pump earlier in the year did a very poor job. Cutting Edge was amazing! They replaced the fuel pump and some other small parts and were extremely professional and gracious with my situation. I am very happy with the services Cutting Edge provided and I will never hesitate to use them again.